About Porous Pave

Porous Pave with its unique use of materials, allows the entire surface area to be porous, which allows an amazing 5,800 gallons of water per hour, to pass through each square foot of surface area.

Porous Pave is the proven "pour in place" permeable paving material that is mixed on site, and applied as a single monolithic pour. Porous Pave installation is faster than traditional pavers and is easier than concrete to finish.

A typical 4-person crew, can install up to 3,000 square feet per day, using a single mortar mixer, traditional concrete tools, and a small amount of wood to form barrier boards.

Porous Pave offers little down time. Within as little as 24-hours, your surface is ready to be used and enjoyed for years to come.

Porous Pave XL

Porous Pave XL – The strongest, most durable blend with rubber chips, stone aggregate and binder that provides a tough, wear resistant and worry free surface. Porous Pave XL is ideal for:

  • Roof Tops
  • Driveways
  • Parking lots
  • Pathways
  • Trail ways
  • Sidewalks
  • Patios
  • Pool Surrounds
  • Tree surrounds
  • Water features
  • Maintenance strips
  • Steep inclines – up to 30% grades

Porous Pave XLS

Porous Pave XLS is a soft version of Porous Pave using all rubber chips and a softer binder and is ideal for:

  • Playgrounds
  • Pool
  • Surrounds
  • Splash pads
  • Walkways

Critical Fall Test

Porous Pave XLS in combination with Safety Shock Pads, is an ideal surfacing solution around playground equipment. It can be applied in high fall risk areas prevent injuries, both indoors and outdoors. Adding the Porous Pave Safety Shock Pad under 2″ of Porous Pave XLS increases the critical fall rating from 4′ to 7′, adding a 3″ shock pad increases this from 4′ to 9′.

The Pro Play Shock Pad only needs to be added in fall zones requiring more than a 4′ critical fall rating. Porous Pave Safety Shock Pad Dimensions—4′ x 6′ or 24 sq. ft.